)
It is intended for quick measurement and testing of hardness of structural, carbon-base and stainless steel and nonferrous metal alloys in laboratory-like and field environments.
Technical specifications:
| TDM-2 | |||
| Hardness scale | Measurements limits | Absolute error | Resolution capability |
| HB | 90…450 | ±15 | 1,0 |
| HRC | 20…70 | ±2,0 | 0,1 |
| Measurement results correction according to probe space position | +0º, 90º,180º |
| Calibration option | + |
| Statistic measurement mode | + (3 and 5) |
| Automatic translation of hardness to the ultimate tensile strength (according to GOST 22761) | - |
| Battery discharge level control | + |
| Automatic alarm system of measured value overrunning the user preset limits | visual |
| Measurement results storage | - |
| Connection with PC via RS232 port; testing report generation option | - |
| Non-stop operating time with full batteries,at least, hour | 25 |
| Operating temperatures range | minus 20….+50ºС |
| Case protection level according to GOST 14254 | IP65 |
| Electronic unit dimensions, mm | 85 × 126 × 35 |
| Unit weight, up to, kg | 0,4 |
