)
)
)
BASIC TECHNICAL CHARACTERISTICS:
| Operating frequency range from | 0,4 to 15 MHz |
| Inspection range (in steel) | 0…6000 mm |
| Gain dynamic range | 100 dB |
| Absolute error when measuring the Hx flaw depth | ±(0,1+0,005 Hx) mm |
| Absolute error when measuring the Nx signal amplitudes ratio | ± (0,2+0,03 Nx) dB |
| Weight | up to 0,8 kg |
| Dimensions | 105 x 190 x 80 mm |
IS INTENDED FOR:
- Discontinuities and irregularities detections in materials, items, semi products, welded and soldered joints;
- Flaw depth and coordinates measurement;
- Echo signals amplitudes ratio measurement;
- Defect equivalent size measurement;
- Item thickness measurement;
- Sound velocity measurement;
- Defect equivalent and conditional sizes measurement;
MAIN FEATURES:
- All thickness gauge functions;
- A scan and B scan;
- Rectifier: RF/full wave/+ half wave/ half wave;
- Gain control function set, including AGC, TCG;
- Automatic probe and test piece parameters calibration interface;
- Several DGS diagrams operating modes;
- Two independent tree level measuring gates;
- Coupling control system;
- Flaw detection alarm system on all gate's levels;
- Bright three color alarm LEDs;
- Advanced peak curve mode;
- Mode of current signal overlaying an earlier frozen one ("freeze and live" mode);
- Dynamic control of the pulser parameters depending on the probe frequency;
- Reflections highlight mode;
- Special program interface option;
- "User", "Expert" menu modes;
- Results and settings storage;
- Communication with PC via USB port.
